Tennant T600-800C Walk-Behind Scrubber-32"Cylindrical,240AH

Tennant T600-800C Walk-Behind Scrubber-32"Cylindrical,240AH

Item # TNT600-800C

  • Scrub longer between empty and fill cycles with large capacity 32 gallon solution tank and 37 gallon recovery tank.
  • Scrub motor: 2 x 36 VDC, .9 hp; Brush pad rpm: 760
  • Vacuum motor: 36 VDC, 0.75 hp; Waterlift: 50"
  • Batteries: (6) 240 AH Wet
32", Cylindrical, 240 AH, ea
Alternate #T600-800C
$24,456.78/EACH
Description

Tennant T600-800C Cylindrical Floor Scrubber | Pro-San

The Tennant T600-800C is a heavy duty cylindrical floor scrubber built for warehouses, manufacturing floors, and any facility running textured or grouted surfaces a disk machine can't reach into. This is the 32" cylindrical version, with brushes counter-rotating to dig into grout lines and uneven texture instead of skating over them the way a flat disk pad does.

Cylindrical vs. Disk

Disk pads work best on smooth, flat floors and cost less to run day to day. Cylindrical brushes agitate deeper, which matters on quarry tile, grouted surfaces, and floors that see heavy grease or grit. If your floor is smooth VCT or polished concrete, a disk model is usually the better buy; if it's textured or grouted, cylindrical is worth the difference.

32 gallon solution tank, 37 gallon recovery tank, (6) 240 AH wet batteries. Scrub motor: 2 x 36 VDC, .9 hp. Vacuum motor: 36 VDC, .75 hp. Brush pad RPM: 760, waterlift: 50".

Built for Tough Environments

Corrosion-resistant scrub deck, rust-proof polyethylene body and tanks, and 36-volt system voltage for consistent power under load. This heavy duty commercial scrubber is rated for a theoretical max of 42,240 sq. ft./hr., with scrubbing speed up to 3.0 mph.

$24,456.78 each. As an authorized Tennant dealer, we stock parts and do shop repair on this and other Tennant models already in your fleet. Call 919-598-1324 or email Info@Pro-San.com.
Specifications

Features

  • Console is standard with Quiet-Mode[TM] and Zone Settings[TM].
  • Conveniently and easily carry items on the accessory rail.
  • Pinch-style recovery hose helps control dirty water flow.
  • Charge anywhere with the convenient on-board charger.
  • Auto fill is standard for convenient hose fill.
  • Easily and ergonomically lower and raise the foot activated squeegee.
  • Virtually eliminate water drips after cleaning with an integrated p-trap.
  • Save time and ensure proper maintenance with yellow touch points.
  • Safely control the removal of excess fluids via the battery compartment drain tube.
  • Easy access to solution filter bowl makes cleanout simple and quick.
  • Increase traction with tires with enhanced grip.
  • Quickly identify when brushes need replacement with the yellow brush wear indicator.
  • Easily remove scrub brushes with the yellow release plunger.
  • Ensure simple and easy cleanout with recovery tank on top and solution tank on bottom.
  • Yellow debris tray helps prevent machine clogging.
  • Improve operator ergonomics with propel direction switch and speed/variable bail settings within easy reach.

Specifications

  • Brush Down Pressure: Low: 50 lbs; Medium: 70 lbs.; High: 90 lbs.
  • System Voltage: 36 volt
  • Scrubbing Speed: 3.0 mph
  • Transport Speed: 3.3 mph
  • Dimensions: 64" L x 35.1" W x 43.6" H
  • Aisle Turnaround Width: 67.5"
  • Productivity (per hour): Theoretical Max: 42,240 ft2/hr
Recently Viewed Items